Berg Receivers

Now manufactured by Castle Creations, the Berg Microstamp 4L is even smaller and lighter than the previous version. This full-range, 4-channel receiver has an on-board microprocessor with new software for nearly glitch free performance. The "True Digital Signal Processing" (TDSP) software uses adaptive algorithms to filter out invalid pulses for virtually glitch free performance even in harsh RF environments like indoors. In addition, the receiver has "Transmitter Signal Recognition" (TSR) software. Upon power up, the receiver learns the characteristics of your transmitter like positive (JR/Airtronics) or negative (Futaba/Hitec) shift, number of channels, trigger pulse length and approximate frame rate. Once learned, the receiver locks onto your transmitter and rejects signals from other transmitters that have different characteristics. Finally, it has a programmable fail-safe function. In the event of a signal loss, it can be programmed to hold the last good servo positions, and upon extended signal loss, automatically switch to pre-programmed servo positions that you can set, for example, to cut the throttle, apply slight up elevator and left rudder to perform a gentle descending circle.

Requires:

Berg by Castle Creations Micro Crystal (sold separately)

Specifications:

4 Channels (1-2-3-4)

Triple tuned RF circuitry with steep flank 8 pole IF ceramic filter set

TDSP filtering in the microprocessor decoder, with adaptive algorithms based on signal to noise ratio of the received signal

2.0uV sensitivity

Programmable HOLD mode - all servos are held in position of last known good signal before signal loss

Programmable fail-safe mode - upon two seconds of no signal, servos move and hold pre-programmed position until the signal returns

Full cavity injected molded protective case version of the popular Microstamp receiver. This full-range, 4-channel receiver has an on-board microprocessor with new software for nearly glitch free performance. The "True Digital Signal Processing" (TDSP) software uses adaptive algorithms to filter out invalid pulses for virtually glitch free performance even in harsh RF environments like indoors. In addition, the receiver has "Transmitter Signal Recognition" (TSR) software. Upon power up, the receiver learns the characteristics of your transmitter like positive (JR/Airtronics) or negative (Futaba/Hitec) shift, number of channels, trigger pulse length and approximate frame rate. Once learned, the receiver locks onto your transmitter and rejects signals from other transmitters that have different characteristics. Finally, it has a programmable fail-safe function. In the event of a signal loss, it can be programmed to hold the last good servo positions, and upon extended signal loss, automatically switch to pre-programmed servo positions that you can set, for example, to cut the throttle, apply slight up elevator and left rudder to perform a gentle descending circle.

Requires:

Berg by Castle Creations Micro Crystal (sold separately)

Specifications:

4 Channels (1-2-3-4)

Triple tuned RF circuitry with steep flank 8 pole IF ceramic filter set

TDSP filtering in the microprocessor decoder, with adaptive algorithms based on signal to noise ratio of the received signal

2.0uV sensitivity

Programmable HOLD mode - all servos are held in position of last known good signal before signal loss

Programmable fail-safe mode - upon two seconds of no signal, servos move and hold pre-programmed position until the signal returns

Don't let the tiny size and light weight fool you, this is a full range receiver. The Berg 7P provides the sold precise control and superior noise rejection every modeler demands. The same proven microprocessor driven True Digital Signal Processing (TDSP) and Transmitter Signal Recognition (TSR) functions that have made the Castle Creations Berg 4 the industry standard in full range receiver performance ensure flight after flight of glitch-free operation.

Connect the Berg 7P to your Castle Link for unprecedented control of its numerous programmable functions! Easy channel mapping and adjustable servo response rate are the initial basic features. There's also a "real time" slider control on screen to set your fail safe servo positions and view your transmitter's signal outputs as you move your radio's control sticks. The Berg 7P has seven output channel ports, but you can replace any of them with channels 8 and 9 using the Castle Link. Look for even more amazaing programmable features to be added in the future.

Berg 7P Receiver User Guide

Requires:

Berg by Castle Creations Micro Crystal (sold separately)

Specifications:

7 Channels - any 7 of channels 1-9 may be programmed

Triple tuned RF circuitry with steep flank 8 pole IF ceramic filter set

TDSP filtering in the microprocessor decoder, with adaptive algorithms based on signal to noise ratio of the received signal

Better than 1.2uV sensitivity

Programmable HOLD mode - all servos are held in position of last known good signal before signal loss

Programmable fail-safe mode - upon two seconds of no signal, servos move and hold pre-programmed position until the signal returns

Don't let the tiny size and light weight fool you, this is a full range receiver. The Berg 7P provides the sold precise control and superior noise rejection every modeler demands. The same proven microprocessor driven True Digital Signal Processing (TDSP) and Transmitter Signal Recognition (TSR) functions that have made the Castle Creations Berg 4 the industry standard in full range receiver performance ensure flight after flight of glitch-free operation.

Connect the Berg 7P to your Castle Link for unprecedented control of its numerous programmable functions! Easy channel mapping and adjustable servo response rate are the initial basic features. There's also a "real time" slider control on screen to set your fail safe servo positions and view your transmitter's signal outputs as you move your radio's control sticks. The Berg 7P has seven output channel ports, but you can replace any of them with channels 8 and 9 using the Castle Link. Look for even more amazaing programmable features to be added in the future.

Berg 7P Receiver User Guide

Requires:

Berg by Castle Creations Micro Crystal (sold separately)

Specifications:

7 Channels - any 7 of channels 1-9 may be programmed

Triple tuned RF circuitry with steep flank 8 pole IF ceramic filter set

TDSP filtering in the microprocessor decoder, with adaptive algorithms based on signal to noise ratio of the received signal

Better than 1.2uV sensitivity

Programmable HOLD mode - all servos are held in position of last known good signal before signal loss

Programmable fail-safe mode - upon two seconds of no signal, servos move and hold pre-programmed position until the signal returns

 This 72MHz FM single conversion crystal is for the Berg by Castle Creations Microstamp receivers.