Radical RC

The Snotliner was originally designed for an indoor race that required a GWS IPS A drive. The kit has parts for several power options, the favorite being a 12mm direct drive brushless motor. A brushed IPS motor with a GWS 3x3 prop supplies plenty of power. Brushless 12mm Medusa & 2S-340 lipos will supply out of sight vertical. It will handle up to a 25mm motor for pilots with a need to go way too fast!
The kit is designed using CAD-technology and the parts are Laser cut for a perfect fit. It is a self jigging design using balsa and plywood which makes it both easy to build and repair. Most parts are interlocking like a jigsaw puzzle. This model is recommended to the average builder/pilot with moderate experience from a couple of models before. Simple construction produces a light but rugged speedster. Model flys well at low speeds and will fit well into larger indoor enviroments like golf domes although it was designed primarily as a racer.

Specifications:
Span: 22 inches
Weight: 3.5-5.5 ounces
Motor: 12mm direct drive or small brushless ”outrunner”.
Battery: 2S x 340-800mAh LiPo
R/C: Aileron, Elevator,Throttle
Note, Fox Lite 12mm motor mount included!

If you've grown comfortable with our Micro Stick, perhaps you are ready for the Micro Bipe. This aggressive little beast does not know it shouldn't be able to fly. Kit comes with all the parts required to build with the large top wing (13.8" span pictured) for intermediate pilots or the small top wing (only 10.8"!!!) for the bolder more advanced pilots. With a Medusa 12mm 4000kv motor and 3-3 or 4-2.5" prop she's a really irate insect. Comes complete with pushrod wire, horns, rod end keepers, landing gear wire and wheels.
Suggested (not included) components are the Fox Lite XL 12MM motor mount, Waypoint 038 or Hitec HS-50 or Heco 490/540 servos (sub .2oz), Berg-FMA M5/6-GWS Pico receivers (sub 10 gram), 360 to 760mah 2S SHD lipo pack, 3-3 and 4-2.5 props with adapter and lots of testosterone! She can be tamed quite a bit with the large top wing but we warn you; she's pure aggression with the small top wing. Build her wisely!

The Micro Bipe weighs in at 4.5 to 5.5 ounces depending on equipment choices. Kit exhibits our new ultra-rugged Space-Frame doublers and inline Formers, both Radical RC innovations in the RC Kit Field. Like most of our kits, 90% of it may be assembled prior to gluing due to the close fit of the lazer cut parts.

If your thinking of other motors or CD-ROM setups, the requirements are 20 watts plus and 50mph pitch speed or more. Only the smallest lightest motors should be considered.

At long last, the Micro Stick in a Low Wing version!
The Micro Low Stick flies much larger than it is.
Average span is a mere 17 inches, yet she holds normal modern micro gear.
Nothing expensive or exotic required to get this bird in the air.
Endowed with landing gear, Spandau machine gun, spoke covers, faux cocpit pad-ring and all the classic stick character.
Exhibits our updated ultra-rugged Space-Frame Doublers and In-Line Formers, both Radical RC innovations in the RC Kit Field.
Like most of our kits, 90%+ may be assembled prior to gluing due to the press fit and joinery!
Requirements:
Fox Lite XL motor mount; Waypoint 038, Hitec HS-50 or Heco 490/540 servos (sub 0.2oz.); Berg, FMA M5/6, GWS Pico RX (sub 10g); 340 to 760mAh 2S LiPo pack, GWS 12mm 50XC motor, 3X3 prop. Graphics sold separately.
Specifications:
Weight: 3.25-4.0oz.
Wing Span: 17" avg.
Wing Area: 88sq in.
Length: 14.5"
Wattage: 14+
Flying Area: Ball Park or Golf Dome.

At Last! A small model that uses simple gear! The Micro Stick is hot at full throttle, faster than you'd expect, yet the wing loading is that of an indoor flyer. Weighing in at only 3oz, it's hard to believe it only needs your typical park flier gear. Two .2oz servos like Pico, HE2003, HE490 or HS-50, a Pico, Berg or FMA M5/6 RX and a 2 amp GWS or Pixie 7P speed control. Any 360 to 760 2S lipo pack works well. The prop reamer below is suggested as the 3-3 props are often too tight on the 50XC motor shaft. Your sure to have fun with this little beast.

Note, Updated to V2 style in 2007. All Micro Sticks now have space frame formers, landing gear plate (for optional landing gear if you like), tail weight/material reduction, larger magnets, front wing centering pin, formerless battery floor and overall even more rugged.

Specifications:
Weight 3oz,
Wing Area: 88 Sq. in.,
Wing Span: 17",
Length: 14.5" long.
Wing is held on with a simple magnet! So, you can change the battery in a flash. We know you'll enjoy the new Micro Stick.

The Mini is an outgrowth of the Micro Stick. First introduced at Toledo Expo 2004, this larger version has a longer tail moment, longer wingspan at 23" and is ideally suited for a GWS S-300A direct drive motor system. For those wanting a more tame Mini-Stick, it also has very good sport aerobatic power on the 50XC direct system. We've flown both power systems in a golf dome and they fit nicely. On the S-300 direct the Mini-Stick is very fast and aerobatic. It also flys well on the geared GWS/LPS-RXC-A 7-6 prop, As much climb as the S-300, less speed, good aerobatics and lighter than the S-300. Great fun on a small scale. Also, the kit comes with two sets of wing tips and tail parts. You can build it with a Sport/Pylon Racer or with a Sweet Stick/Eindecker styled look.
Specifications:
Finished weight 5-7 oz.
Wing span 23".
Wing area 132in. sq.
Build as 3 or 4 channels, recommend .2oz or less servos, FMA M5 or similar RX, Castle Pixie 7 or GWS-ICS50 for 50XC motor, Castle Pixie 20 for S-300 motor, any high discharge pack from 360 to 1200 mah.

Capable of big sky flying or ball park low-n-slow! You can trust the Quick Wing in any flight condition. Any 20mm brushless motor system capable of turning a 4-6" prop at 50-150 watts or more will work well. She is sure to please the most speed hungry wing fanatic while still retaining very good slow speed handling characteristics. Quick "3D Jigsaw Puzzle" assembly in only 1-2 hours. World class laser cutting and design make this one of the quickest and most enjoyable balsa models you will ever build. You'll be amazed at the wide speed envelope the Quick Wing has. It easily goes from high speed to ball park flying with no bad habits. I'm totally comfortable recommending this kit as a good 2nd or 3rd model as long as you keep the power system modest. Advanced pilots can take the power as far as they like.

Specs:
Wing Span 22.25"
Wing Area 195 sq. in.
Weight 8.5-14oz.
Length 13.75"
Average Cord 9.75"

Required: Covering;3ch+ Radio with elevon mixing; RX;2 Micro servos (HS-55 or similar); 50-200 watt 20mm motor; Prop; 700-1800mah+/- 2S-3S LiPB; ESC.

Possibly the worlds smallest servo driven flying wing ever! I wanted something different from the herd of swept wing pushers you seem to see everywhere. Being In a bit of a gothic mood at the time, the Wicked Wing was born. This little beast really moves out on a simple 50XC brushed motor. Of course you could fly it with any 12mm brushless motor of your choice and even many of the micro outrunners. it needs about 14 watts to fly with authority.
2 Small servos under 6 grams, an ESC (min 2 amps for the 50XC brushed motor) and a very small RX. We like the Berg 4L for this project the best. This model can be very fast, it's not a good first or second airplane choice. If you're flying well and want something to challenge your skills and wow your friends then this it. remember, at 50mph it covers 77 feet in 1 second! Judicious throttle control is a definite a requirement. This model goes together like a 3D jigsaw puzzle. You will have it framed up and ready for finish in about 1 hour. Fly weight is about 3oz, Span is about 11". About the size of the top wing on a Micro Bipe!